![]() I have tried to boot and inscert the cable at the same time but this has failed. ![]() I get the bouncing firewire logo on the Emac but that is all. I have also tried to boot from Target Mode using my Imac G5 via a new Firewire cable and the Emac fails to mount. Proir to me changing the hard drive to the 80gb I was having the same problem with the original 40gb drive which is now working fine in the G3 IMac I have also tried the same with a retail version of Jaguar and I have the same problem. I have tried to reinstall the retail version of Panther but if fails to recognise the cd from a straight cd boot ( when pressing ‘C’ ) and only shows me the broken folder. when I swapped the drives over the Emac booted but after a while it would freeze. I also know the hard drive good as I swaped the original 40gb with the 80gb drive that I had installed in the G3 Imac. The problem I have is that It will not install from the combo drive, the drive mounts any disc I know it not the drive as It can read my iMac G5 Tiger Disc’s but will not install them as they are only for my G5 I have a Emac G4 1.25mhz which I bought from Ebay, to replace my sons old Imac G3 (He moaned he could not watch Iplayer on it)
0 Comments
Leave a Reply. |